5-16
IP Filter
Use this to block the reception of data from certain locations.
To block a particular IP address, specify the IP address in ‘FilterX Address’ (X is a
number between 1 and 5) and the subnet mask in ‘FilterX Mask’ as numbers
between 0 and 255. For the set address, select ‘OFF’ (default), ‘Reject’, or ‘Accept’
from ‘FilterX Mode’.
You can filter up to 5 addresses. Filter1 takes priority over the other filters. Therefore,
when setting filters for a number of addresses, assign the addresses in ascending
ranges from Filter1 to Filter5.
See
You can also set IP filter settings by connecting to the printer using a web
browser or by using the BRAdmin Professional software. For a detailed
examples of these settings, refer to the “Network Use's Guide” on the provided
CD-ROM.
For more information about Web Based Management, refer to 8.5 “Confirming
Printer Status from Your Computer”.
Init NVM
This resets the non-volatile memory of the network card (also known as a print
server).
Look
4You cannot change this setting while the printer is processing print data.
• YES
Resets the memory card's non-volatile memory. Resetting the NV memory
restores the items of the ‘5 Network’ menu to their defaults.
Look
5You must restart the printer for this setting to take effect. After configuring items, be
sure to restart the printer.
• NO
Does not reset the NV memory and returns to the menu.