Brother HL-5270DN Reprint, + or - button, Back, Set

4. Control Panel
49
Reprint
If you want to reprint a document that has just been printed, press Reprint.
You can reprint when the printer is in the READY or PAUSE state.
For details, see Reprinting documents on page 52.
+ or - button
Moving through menus on the LCD
Pressing the + or - button when the printer is in the Ready state, takes it offline and the LCD will show the
control panel menu.
Press to scroll through the menus and options. Press or keep pressing the button until you see the setting
you want.
Entering numbers
You can enter numbers in two ways. You can press the + or - button to move up or down one number at a
time, or you can hold down the + or - button to move faster. When you see the number you want, press Set.
Back
If you press Back when the printer is online (READY), it goes offline and the LCD returns to the menu.
Pressing Back allows you to return to the previous level from the current menu level.
Back also allows you to choose the previous digit while setting numbers.
When you choose a setting and it does not have an asterisk (Set was not pressed), Back allows you to return
to the previous menu level with the original setting unchanged.
Note
When you press Set to choose a setting, an asterisk appears briefly at the end of the display. Since the
asterisk shows what you have chosen, you can easily see the current settings as you look through the
LCD.
Set
Pressing Set when the printer is in the Ready state takes it offline, and the LCD will show the control panel
menu.
Pressing Set allows you to choose the displayed menu or option. After changing a setting, an asterisk (*)
appears briefly on the right-hand side of the message.