TROUBLESHOOTING 6 - 8
2
Use both hands to slowly pull out the jammed paper.
Figure 6-4
3
Put paper below the maximum paper mark (). While pressing the [blue] paper-guide release lever,
slide the paper guides to fit the paper size. Check that the guides are firmly in the slots.
4
Put the paper tray firmly back in the printer.
5
Open the front cover of the printer, and then close it to resume printing.
Caution
Do not take out the upper paper tray while paper is feeding from a lower paper tray because this will
cause a paper jam.
If you cannot pull out a small piece of jammed paper, you can remove it by turning the dial, as
shown below.
Figure 6-5