Brother HL-7050 Series RAM expansion

OPTIONS 4 - 13
HL7050_US_UG_FM5.5
RAM expansion
The HL-7050 and HL-7050N printer have 32 MB of standard memory
and two slots for optional memory expansion. You can expand the
memory up to 288 MB by installing dual in-line memory modules
(DIMMs). (The standard memory varies depending on the printer
model and country.)
You can install the following DIMMs:
<US>
■16 MB Techworks 12456-0001
■32 MB Techworks 12457-0001
■64 MB Techworks 12458-0001
■128 MB Techworks 12459-0001
<Europe>
■16 MB Buffalo Technology 12323-0001
■32 MB Buffalo Technology 12324-0001
■64 MB Buffalo Technology 12325-0001
■128 MB Buffalo Technology 12326-0001
In general, the DIMM must have the following specifications:
Type: 100 pin and 32 bit output
CAS lantency: 2 or 3
Clock frequency: 66 MHz or more
Capacity: 16, 32, 64 or 128 MB
Height: 46 mm (1.8 in.) or less
Parity: NONE
Dram Type: SDRAM 4 Bank
SDRAM can be used.
For more information, visit Techworks website at
www.techworks.com
■For more information, call the dealer you bought the printer
from.
■For the latest information and drivers, visit the Brother
Solutions Center at http://solutions.brother.com