Brother LX2500 operation manual Controls, Pattern selection dial, Patterns and stitch names

KNOWING YOUR SEWING MACHINE—————

5Lower the presser foot lever and fix the presser foot onto the shank. If the presser foot is in the correct place, the bar should snap in.

1 2

1Shank

2 Bar

■Presser foot installation orientation

CAUTION

●If the presser foot is not installed with the correct orientation, the needle may strike the presser foot, which may bend or break the needle and cause injury.

THE CONTROLS

Pattern selection dial

CAUTION

●When you use the pattern selection dial to choose a pattern, raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up. If the needle is in the down position when you turn the pattern selection dial, the needle, presser foot or fabric may be damaged.

To choose a stitch, simply turn the pattern selection dial in either direction.

2

1

1Pattern selection dial

2 Chosen pattern number

Patterns and stitch names

■ 17 Stitches
	1
		2	3	4	5	6	7	8
9	10	11	12	13	14	15	16	17
	Pattern		Preset Length
				(mm (inch))			Reference
	Stitch Name		Preset Width				Page
				(mm (inch))
	1
				0.5 (1/32)			27
4-STEP AUTOMATIC				5 (3/16)
	BUTTONHOLE
	2			1.6 (1/16)
STRAIGHT STITCH							23, 31
	(Center Needle			—
	Position)
	3			1.8 (1/16)
STRAIGHT STITCH							23, 31
	(Center Needle			—
	Position)

9