Brother LX2500 operation manual Optional Accessories, Using the walking foot

USING ATTACHMENTS AND APPLICATIONS —————

OPTIONAL ACCESSORIES

Using the walking foot
Stitch Name	Pattern	Stitch	Stitch Width
		Length
			[mm (inch)]
		[mm (inch)]
Straight Stitch	5
(Center Needle		2.5 (3/32)	—
Position)
Straight Stitch	7
(Left Needle		2.5 (3/32)	—
Position)
Zigzag Stitch	8	0.7 (1/32)	1.5 (1/16)
Zigzag Stitch	9	1.5 (1/16)	3 (1/8)
Zigzag Stitch	10	2 (1/16)	5 (3/16)
Zigzag (Satin)	11	0.5 (1/32)	5 (3/16)
Stitch

The walking foot is very useful for sewing materials such as vinyl cloth, synthetic leather, thin leather, etc. These materials are difficult to feed when sewing. The walking foot prevents these materials from crumpling, slipping or sticking to the sole of the presser foot and the material.

Note

●Only use the walking foot with straight or zigzag stitches. Do not use other patterns. Reverse stitches can not be sewn with the walking foot.

1Turn off the machine.

2Raise the needle and the presser foot.

3Loosen the presser foot screw to remove the presser foot holder.

2

1 3

1Use the oval screwdriver

2 Presser foot holder

3 Presser foot screw

4 Hook the connecting fork of the walking foot onto the needle clamp screw.

1 2

1Connecting fork

2 Needle clamp screw

5Lower the presser foot lever and then tighten the presser foot screw.

1

1Presser foot screw

CAUTION

●Use the oval screwdriver to tighten the screw securely. If the screw is loose, the needle may hit the presser foot and you may be injured.

●Turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.

33