Step 2 Installing the Driver & Software
For Network Interface Cable Users
(For Windows® 95/98/98SE/Me/NT/2000 Professional/XP)
Make sure that you have completed the instructions from Step 1 “Setting Up
1Make sure that the
2Connect the network cable to the MFC, and then connect it to a free port on your hub. Turn on the MF C by plugging in the power cord. Turn the power switch on.
3Turn on your computer.
(For Windows® 2000 Professional/XP and Windows NT® 4.0, you m ust be logged on
as the administrator.)
4Insert the supplied
6Click
M
7Click Install.
If you see the follow ing screen, click OK to install the Window s® updates. After the updates are installed your PC may restart. N ote: If it does the installation will automatically continue.
5The
If this w indow does not appear, use
W indows® Explore to run the setu p.exe program from the root directory of the Brother C
If the installation does not continue automatically, please open the installer m enu again by
setu p.exe program from the root directory of the Brother C
38