Step 1 Setting Up the Machine
1Install the Automatic Document Feed (ADF) Support
Do NOT connect the interface cable. Co nnecting the interface cable is done when in stalling the d river.
1Open the ADF cover.
ADF Cover
2Insert the tabs of ADF support into the holes of the ADF one side at a time.
Tab
Hole
Tab
ADF Support
3 Push ADF Support down until it latches in place.
2Install the Drum Unit Assembly
1Open the front cover by pressing the front cover release button.
Front Cover
Release Button
Front Cover
2Unpack the drum unit assembly. Remove the protective part.
Drum Unit
Assembly
Protective Part
4 Close the ADF cover.
4