Step 2 Installing the Driver & Software
For Network Interface Cable Users
For Mac OS® 8.6 to 9.2
Make sure that you have completed the instructions from Step 1 “Setting Up
1Make sure that the
2Switch off and unplug the MFC from the AC outlet and disconnect it from your Macintosh if you already connected an interface cable.
3Turn on your Macintosh® .
4Insert the supplied
6Click Install next to the M
7Select Network Interface, and then click Install.
8After the installation is completed, restart your Macintosh® .
9Connect the network interface cable to the printer, and then connect it to a free port on your hub.
5
0Turn on the MF C by plugging in the power cord. Turn the power switch on.
46