1 - 17 USING THE MACHINE AS A PRINTER
5
Press or to select Print.
Press Set. The machine prints the data.
—OR—
If you want to delete the secured data press or to
select Delete.
Press Stop/Exit.
Setting the Emulation Selection
This machine has an Automatic Emulation Selection function. When
the machine receives information from the PC, it automatically
chooses the emulation mode. This function has been set at the
factory to AUTO.
You can change the default emulation mode manually by using the
control panel.
1
Press Menu, 4, 1.
(For DCP-8040 and DCP-8045D,
press Menu, 3, 1)
2
Press or to select Auto,
HP Laser Jet or BR-Script3.
Press Set.
3
Press Stop/Exit.
■If you turn the power switch Off, the secured data saved in
memory will be cleared.
■After you print the secured data it will be cleared from
memory.
The LCD screen shown in this section is from MFC-8440,
MFC-8640D, MFC-8840D and MFC-8840DN.
Try this function with your application software or network
server. If the function does not work properly, either select the
required emulation mode manually using the machine panel
buttons or use the emulation selection commands in your
software.
41.Emulation
▲Auto
HP LaserJet
▼BS-Script 3
Select ▲▼ & Set