Brother MFC-890 8

Step 1 Setting Up the machine

7Gently insert the black ink cartridge in the black ink position.

8Press the cover down until it clicks.

9Repeat Steps 5 to 8 to install each colour ink cartridge. Match the colours of the ink cartridge covers.

0Close the scanner cover. The machine will enter a head cleaning cycle for approximately six minutes.

CLEANING

PLEASE WAIT

•DO NOT remove ink cartridges if you do not need to replace them. If you do so, it may reduce the ink quantity and the machine will not know the quantity of ink left in the cartridge.

•DO NOT shake the ink cartridges. If you do so, the ink may spill when you take off the sealing tape. If ink stains your body or clothing, wash with soap or detergent immediately.

•DO NOT refill the ink cartridges. Attempting to use refilled cartridges and using incompatible inks may cause damage to the print head in this machine and such damage will not be covered by warranty. Warranty coverage does not apply to problems caused by the use of 3rd party ink or 3rd party ink cartridges. Use only genuine Brother ink cartridges.

■If you mix the colours by installing an ink cartridge in the wrong colour position, you must clean the print head several times after correcting the cartridge installation and before you start printing.

■Once you open an ink cartridge, install it in the machine and use it up within six months of installation. Use unopened ink cartridges by the expiration date written on the cartridge package.

■If INK EMPTY shows on the LCD after you install the ink cartridges, check to make sure the ink cartridges are installed correctly.