Brother MFC-890 9

6Colour Block Quality and Alignment Check

1After the cleaning cycle is finished, the LCD shows;

SET PAPER AND

PRESS FAX START

2Make sure the paper is loaded in the paper tray.

Press the Fax Start key.

3The machine starts printing the PRINT QUALITY CHECK SHEET (only during initial ink cartridge installation).

Check in Step A

Check in Step B

Step A:Colour Block Quality Check

1The LCD shows:

IS STEP "A" OK? 1.YES 2.NO

Check the quality of the four colour blocks printed on the sheet.

(BLACK/CYAN/YELLOW/MAGENTA)

2If all lines are clear and visible, press the key on the dial pad to go to STEP B Alignment Check.

— OR—

If you can see missing short lines, press the key on the dial pad and go to step 3.

OKPoor

3The LCD asks you if the print quality is OK for each colour. Press the key or key on the dial pad.

BLACK OK? 1.YES 2.NO

When you have finished selecting the key (YES) or the key (NO) for each colour, the LCD shows:

START CLEANING? 1.YES 2.NO

Press the key (YES), and then machine starts cleaning the colours.

After cleaning is finished, press the

Fax Start key. The machine starts printing PRINT QUALITY CHECK SHEET again and goes back to the first step of STEP A.

Step B:Alignment

Check

1The LCD shows:

IS STEP "B" OK? 1.YES 2.NO

Check the 600 DPI and 1200 DPI test print to see if No.5 most closely matches the OK sample (No.0). Press the key if No.5 matches it.

No.5

600 DPI

Do NOT select

1200 DPI

1If another test print number is a better match for either 600 DPI or 1200 DPI, press the key to select NO and go to step 2.

2For 600 DPI, select the number from 1 to 8 that most closely matches the No.0 sample and enter it using the dial pad.

600DPI ADJUST SELECT BEST #

3For 1200 DPI, enter the number from 1 to 8 that most closely matches the No.0 sample.

1200DPI ADJUST SELECT BEST #

The Quality check is now complete.

Setting Up the machine

Windows® USB

®
Windows	Parallel