2 Sending a Fax

Scanning Adjustment

Contrast

If your document is very light or very dark, you might want to set the contrast accordingly. Use LIGHT to send a light document. Use DARK to send a dark document. After sending the document the contrast setting is set to AUTO (suitable for most documents) automatically.

1 Insert the document face down in the ADF.

2 Press Menu, 2, 2, 1.

3 Use or to select AUTO, LIGHT, or DARK. 4 When the screen displays your selection, press Set.

5 Press 2 if you are finished choosing settings, and go to Step 6—OR—Press 1 if you want to select additional settings. The display returns to Setup Send menu.

6 Enter a fax number and press Fax Start.

Fax Resolution

When you have a document in the ADF, you can use the Resolution key to temporarily change the setting. Press Resolution repeatedly until the LEDs show the setting you want.

—OR—

You can change the default setting.

1 Press Menu, 2, 2, 2.

2 Press or to select the resolution you want, and then press Set.

3 Press Stop/Exit.

STANDARD: Suitable for most typed documents.

FINE: Good for small print; transmits a little slower than Standard resolution.

S.FINE: Good for small print or artwork; transmits slower than Fine resolution.

PHOTO: Use when document has varying shades of grey; slow transmission time.

USE FAX BASIC

Sending a Fax 21