d
e Press a or b to choose 2in1 (ID). Press OK.
f Press Black Start or Color Start. The machine starts scanning the first page.
g After the machine has scanned one side, press 1. Turn over the identification card and press OK to scan the other side.
Note
•Sort and Enlarge/Reduce are not available with 2in1 (ID).
•If you are producing multiple color copies, 2 in 1 (ID) copy is not available.
Sorting copies using the ADF
You can sort multiple copies. Pages will be stacked in the order 321, 321, 321, and so on.
a Press 
(COPY). b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Stack/Sort. Press OK.
e Press a or b to choose Sort. Press OK.
f If you do not want to change additional settings, press Black Start or
Color Start.
Note
Fit to Page and Page Layout are
not available with Sort.
Making copies
Adjusting Density
You can adjust the copy density to make copies darker or lighter.
a Press 
(COPY). b Load your document.
c Enter the number of copies you want.
d Press a or b to choose Density. Press OK.
e Press c to make the copy darker or press d to make the copy lighter. Press OK.
f If you do not want to change additional | 7 |
settings, press Black Start or | |
Color Start. |
|
Setting your changes as the new default
You can save the settings for the copy options you use most often by setting them as the default, such as Quality, Enlarge/Reduce, Density and
Page Layout. These settings will stay until you change them again.
a Press 
(COPY).
b Press a or b to choose your new setting. Press OK.
Repeat this step for each setting you want to change.
c After changing the last setting, press
aor b to choose Set New Default. Press OK.
d Press 1 to choose Yes. e Press Stop/Exit.
29 