Brother MFC-J425W, MFC-J435W Packing and shipping the machine

Packing and shipping the machine

When you transport the machine, use the packing materials that came with your machine. If you do not pack the machine properly, any damage that may occur in transit may not be covered by your warranty.

IMPORTANT

It is important to allow the machine to “park” the print head after a print job. Listen carefully to the machine before unplugging it to make sure that all mechanical noise has stopped. Not allowing the machine to finish this parking process may lead to print problems and possible damage to the print head.

a Open the ink cartridge cover.

b Press the ink release levers to release the ink cartridges and then take out the ink cartridges. (uuBasic User’s Guide: Replacing the ink cartridges)

c Install the orange protective part and then close the ink cartridge cover.

IMPORTANT

•Make sure the plastic tab on the right side of the orange protective part (1) clicks securely into place (2).

12

•If you are not able to find the orange protective part, ship the machine without it. DO NOT install the ink cartridges as an alternative before shipping.

d Lift the machine from the front and hook the tab of the orange protective part into the keyed opening (1) on the bottom of the paper tray. Then latch the protective part over the raised portion of the paper tray (2).

2 1

34

Contents

Page User's Guides and where do I find it Table of Contents Dialing and storing numbers Printing reports Making copies Routine maintenance Glossary 1 General setup IMPORTANT NOTE Memory storage Volume Settings Ring Volume Beeper Volume Speaker Volume Automatic Daylight Saving Time Sleep Mode LCD screen LCD Contrast Setting the backlight brightness Setting the Dim Timer for the backlight Mode Timer 2 Security features TX Lock Setting and changing the TX Lock password Turning TX Lock on/off 3 Sending a fax Additional sending options Sending faxes using multiple settings Stop faxing Contrast Changing fax resolution Restoring fax settings to the factory settings Additional sending operations Sending a fax manually Sending a fax at the end of a conversation Dual Access (Black & White only) Broadcasting (Black & White only) Real Time Transmission Overseas Mode Checking and canceling waiting jobs 4 Receiving a fax Additional receiving operations Printing a reduced incoming fax Receiving a fax at the end of a conversation Receiving faxes into memory when paper tray is empty 5 Dialing and storing numbers Voice operations Tone or Pulse (Canada only) Fax/Tel mode Caller ID Special line considerations Converting telephone wall outlets Installing machine, external two-lineTAD and two-linetelephone Additional dialing operations Outgoing Call Caller ID history Dialing access codes and credit card numbers Additional ways to store numbers Storing Speed Dial numbers from Outgoing Calls Storing Speed Dial numbers from the Caller ID history Setting up Groups for Broadcasting Changing a Group name Deleting a Group Deleting a number from a Group 6 Printing reports Fax reports Transmission Verification Report Fax Journal (activity report) Reports How to print a report 7 Making copies Copy settings Stop copying Changing copy quality Enlarging or reducing the copied image Making N in 1 copies or a poster (Page Layout) 2 in 1 ID Copy Sorting copies using the ADF Adjusting Density Restoring all settings to the factory settings A Routine maintenance Cleaning and checking the machine Cleaning the outside of the machine Cleaning the machine’s printer platen Cleaning the paper pick-uprollers Checking the ink volume Packing and shipping the machine Page Page B Glossary Page Page C Index Numerics Page Page Visit us on the World Wide Web http://www.brother.com