Enter 03.

NOTE

•(USA only) If you redial from the Caller ID history outside your area code, you must set up your area code in advance.

(See Setting up your area code (USA only) on page 20.)

•You can print the Caller ID history List. (See How to print a report on page 28.)

Dialing access codes and credit card numbers

Sometimes, you may want to choose from several long-distance carriers when you send a fax. Rates may vary depending on the time and destination. To take advantage of low rates, you can store the access codes of long- distance carriers and credit card numbers as Speed Dial numbers. (See Basic User’s Guide: Storing Speed Dial numbers.)

You can store these long dialing sequences by dividing them and setting them up as separate Speed Dial numbers in any combination.

You can even include manual dialing using the dial pad.

For example, you might have stored ‘555’ on Address Book: 03 and ‘7000’ on Address Book: 02. You can use them both to dial ‘555-7000’ as shown in the following example:

a Press (Address Book).

b Press a or b to choose Search. Press OK.

c

d Press a or b to choose Address Book. Press OK.

e Press a or b to choose Search. Press OK.

f Enter 02.

Dialing and storing numbers (MFC models)

g Press Black Start or Color Start. You will dial ‘555-7000’.

To temporarily change a number, you can use the dial pad to manually substitute part of the number. For example, to change the number to 555-7001, you could enter the

number (03: 555) using (Address Book), choose Search, press 03, and then press 7001 using the dial pad.

NOTE

If you must wait for another dial tone or signal at any point in the dialing sequence, create a pause in the number by pressing 5 Redial/Pause. Each key press adds a 3.5-second delay. You can press Redial/Pause as many times as needed

to increase the length of the pause.

23