3 - 12 FRONT PANEL SETUP
NC9100h_FM6.0
Restoring the Network Settings to Factory Default
To restore all network settings of the internal Print/Scan server to
factory default, please follow the steps below.
1
Make sure the machine is not operating, then disconnect all the
cables from the machine (except power cable).
2
Press Menu/Set, 5, 0. (4, 0 for MFC-5440CN)
3
Press 1 to select Reset.
4
Press 1 to select Yes.
5
The machine will re-start, re-connect cables once this is
complete.