Brother NC-5100H Windows 2000/XP Printing (Printer Driver already installed)

TCP/IP PRINTING 2 - 5

YL4US_FAX2800MFC4800-FM5.5

By using Microsoft's IPP software you can also send jobs to other

printers that do not support the IPP protocol.

Windows® 2000/XP Printing (Printer Driver already installed)

If you have already installed the printer driver and wish to configure

it for network printing, follow these steps:

Select the printer driver you wish to configure.

Select File and then choose Properties.

Click the Ports tab of the driver and click Add Port.

Select the port that you wish to use. Typically this would be

Standard TCP/IP Port. Then click the New Port... button.

The standard TCP/IP Port Wizard will start. Follow steps 6-10

of the “Standard TCP/IP Port Printing” section.

Windows® NT 4.0 Printing

If you did not install the TCP/IP protocol during the installation of your

Windows® NT 4.0 system (either workstation or server) follow these

steps. If you have already installed the TCP/IP protocol, proceed to

the next section.

Go to the Start button, choose Settings, and then select

Control Panel.

Run the Network applet by double clicking the Network icon

and then click on the Protocols tab.

Select Add, and double click on the TCP/IP Protocol.

Ins

ert the requested disk(s), or CD-ROM, to copy the required files.

Click the

button. The Windows

NT system will review

protocol bindings and then you will see the

TCP/IP Properties

dialog.