APPLETALK (ETHERTALK) TCP/IP PRINTING 7 - 6
YL4US_FAX2800MFC4800-FM5.5
1
Select the Printer (LPR) option and click OK. You will then
see the following:
Figure 4 Selecting the PPD and LPR Configuration
2
At this point we must select the correct PPD file for the printer
and also configure the correct LPR information. Click the
Change button in the PostScript Printer Description (PPD)
File section and select the appropriate PPD file for your
model.
3
Now select the Change button below the LPR Printer
Selection text.
4
You must then enter the IP address and service name details
of the printer. When specifying the Queue, use the value
brn_xxxxxx_p1_at where xxxxxx are the last 6 digits of
the Ethernet address.