CONFIGURING INTERNET PRINTING FOR WINDOWS® 5 - 4
YL4US_FAX2800MFC4800-FM5.5
Brother Internet Print Using BRAdmin to Configure the Print Server
The steps required to configure the print server to receive print jobs
from a Windows® 95/98//Me/NT4.0/2000/XP. PC running the BIP
software is as follows:
1
Start BRAdmin.
2
Select the node name of the desired Brother print server from
the list and double click on it. (the default node name is usually
BRN_xxxxxx, where xxxxxx is the last six digits of the
Ethernet address (MAC address)). You will be prompted for a
password; the default password is access.
3
Click on the POP3/SMTP tab.
4
Enter the address of the POP3 server (consult your network
administrator if you do not know this address).
5
Enter the mailbox name for the remote Brother print server.
Usually this will be the first part of the E-mail address (for
example, if the E-mail address of the print server is
emailprinter@xyz, then the mailbox name would be
emailprinter).
6
Enter the password for the mailbox, if any.
Skip this section if you wish to use the print server remote
console or Web Browser to configure the print server.
Using the BRAdmin application, you can configure the
Brother print server using the TCP/IP protocol, or the IPX
protocol.
You can find the node name and MAC address by printing
out the printer configuration page. Refer to the Quick Setup
Guide for information on how to print the configuration page
on your print server.