2Press or to select On or Off.

3Press Set.

4Press Stop/Exit.

DLC/LLC

1(For MFC) Press Menu, 6, 6, 4. (For DCP) Press Menu, 4, 2, 4.

2Press or to select On or Off.

3Press Set.

4Press Stop/Exit.

Net BIOS/IP

The NC-9100h Print / Fax Server supports SMB (Server Message Block) over the TCP/IP protocol via the NetBIOS interface. This means that just like regular Windows® PC's the Brother DCP/MFC can appear in your network neighborhood. The main advantage of NetBIOS printing is that you are able to print from legacy DOS applications that are running on PC’s that are connected to Microsoft networks.

1(For MFC) Press Menu, 6, 6, 5. (For DCP) Press Menu, 4, 2, 5.

2Press or to select On or Off.

3Press Set.

4Press Stop/Exit.

Ethernet

Ethernet link mode. Auto allows the print server to operate in 100BaseTX full or half duplex, or in 10BaseT half duplex mode by auto negotiation.

100BaseTX Full Duplex (100B-FD) or Half Duplex (100B-HD) and 10BaseT Full Duplex (10B-FD) or Half Duplex (10B-HD) fix the print server link mode. This change is valid after the print server has been

10 - 20 FRONT PANEL SETUP MENU