ftp> quit
When you see 226 Data Transfer OK/Entering FirmWareUpdate mode, you can be sure that the firmware file is being transferred to the Print/Fax server. If you do not see this message, the file you are sending to the printer will either be ignored or the printer will print garbage.
You must use the “bin” command to put the FTP client into Binary communications mode. If you do not specify the bin command the upgrade process will not function correctly.
Reloading using the FTP Protocol from a Web Browser
Please visit the Brother Solutions Web site at http://solutions.brother.com for more information on upgrading the Print/Fax server using a web browser.
After sending firmware to the machine, do not turn off the machine until after the machine has performed an automatic restart.
A - 7 APPENDIX