Brother PE 150 manual Auto needle threading device, Net

1

4

2 3 4

Net

If using special threads which wind quickly off the thread spool, attach a net to the spool before using.

*Cut the net to match the size of the spool.

1Net

2Thread spool

3 Spool pin

4 Spool cap

CONTENTS
KNOWLEDGE	MACHINE
EMBROIDERING

Auto needle threading device

6	1.	Guide the thread through the wire loop thread
		guide (number “6”) and gently pull the thread
		towards you.
	2.	Lower the presser foot.
	3.	Lower the needle threader lever until it stops.
		Hook the thread into the guide and pull it
		across to the right.
	1	Wire loop thread guide
2		Needle threader lever
	3	Guide
	*	The needle threading device cannot be used
		while the needle is lowered.
	4.	Push the needle threader lever toward the back.
		Check to be sure that the hook has passed
		through the eye of the needle and route the
		thread under the metal guides and the hook.
	*	Pull the thread toward you and check that it is
		being held by the thread hook.
	1	Hook
	2	Metal guides
	3	Thread correctly under the metal guides and
		the hook.
	5.	While gently holding the thread, pull the
		needle threader lever forward.

6. Release the thread from the needle threader lever.

7. Pull the upper thread through the needle eye toward the rear of the machine.

	MAINTENANCE
	MESSAGE	ERROR
	TROUBLESHOOTING
	PATTERNS
(OPTIONAL)	FRAME	USING A SMALL	EMBROIDERING
FRAME (OPTIONAL)	EXTRA-SMALL	USING A	EMBROIDERING
(OPTIONAL)	FRAME	USING A LARGE	EMBROIDERING

17