Brother PT-1500PC manual Installing the printer driver, Reading the User’s Guide

Continue with the procedure in Installing the printer driver below.

If the printer driver is already installed, click the No button. A dialog box appears, showing that installation is finished.

Select “Yes, I want to restart may computer now.”, click the Finish button to restart the computer, and then remove the CD-ROM from the CD-ROM drive.

Installing the printer driver

With Plug-and-Play, new devices connected to the system are detected, and their drivers are auto- matically installed. Since the PT-1500PC will be connected through the USB port, its driver will be installed with Plug-and-Play. Be sure to read the installation instructions described below before installing the printer driver supplied on the CD- ROM.

Be sure not to connect the PT-1500PC until you are instructed to do so.

1Click the Next button. A dialog box appears, instructing you to connect the PT-1500PC to the computer.

2Connect the PT-1500PC to the computer using the enclosed USB interface cable as described on page 5, and then turn on the PT-1500PC. A dialog box appears, showing that the printer driver has been installed.

3Click the Finish button. A dialog box appears, showing that installation is finished.

4Select “Yes, I want to restart my computer now.”, click the Finish button to restart the computer, and then remove the CD-ROM from the computer.

Reading the User’s Guide

The P-touch Editor User’s Guide can be viewed either by inserting the CD -ROM into the drive each time you wish to refer to it or by installing it onto your hard disk so that it is quickly available at any time. Since the User’s Guide is an HTML document, a browser is needed to read it.

•From the CD-ROM:

1 Start up Windows Explorer.

2 Select the CD-ROM drive.

3 Double-click “Main.htm” in the Manual folder within the Ptouch folder on the CD-ROM.

•From the P-touch Editor 3.1 group window:

￿Double-click The User’s Guide P-touch Editor Ver3.1 icon.

•With the Start button:

1Click the Start button in the taskbar to display the Start menu.

2Select “Programs”.

3Select “P-touch Editor 3.1”.

4Click “The User’s Guide P-touch Editor Ver3.1”.

For Windows®

9