12
For Macintosh
Installing P-touch Quick Editor
The P-touch Quick Editor software provides quick ac-
cess to the more simple label-designing features for easy
text input and instant printing of labels. Install the P-touch
Quick Editor software on a Mac as described below.
1With the PT-1500PC and computer turned
off, connect the PT-1500PC to the Macintosh
using the enclosed USB interface cable. Be
sure to leave the PT-1500PC off.
2Turn on the Macintosh.
3
Insert the enclosed CD-ROM into the computer’s
CD-ROM drive. A folder opens, allowing you to
view the contents of the CD-ROM.
4Double-click the P-touch Quick Editor
Installer icon in the folder that appears. The
installer starts up.
5Select the installation method.
Clicking the Install button immediately starts
installing the most basic options.
About 30 MB of available hard-disk space is
needed to begin installation. In order to install
all options, about 30 MB of available hard-
disk space is needed. If enough hard-disk
space is available, click the Install button.
Clicking the Custom Install button displays a dialog
box that allows you to select which options to install.
Only the options with a check mark beside
them are installed. Select the options that
you wish to install, and then click the Install
button to begin installation.

In order to print from the PT-1500PC,

“PT-1500PC Driver” must be selected for

installation.

6When the installation is finished and the
following dialog box appears, click the Quit
button.
7When the dialog box appears asking if you
wish to restart the computer, click the Restart
button to restart the computer.
Installing P-touch Editor Ver. 3.1
The P-touch Editor Ver. 3.1 software includes a
variety of more complex functions for printing
barcodes and images, enabling you to design just
about any label that you can imagine. Install the
P-touch Editor Ver. 3.1 software on a PC as de-
scribed below.
1With the PT-1500PC and computer turned
off, connect the PT-1500PC to the Macintosh
using the enclosed USB interface cable. Be
sure to leave the PT-1500PC off.
2Turn on the Macintosh.
3Insert the enclosed CD-ROM into the
computer’s CD-ROM drive. A folder opens,
allowing you to view the contents of the CD-
ROM.
4Double-click the P-touch Editor Ver3.1 folder
to open it.