GETTING STARTED

Back Light

You can change the back light setting either to ON or OFF.

The display is easier to see with the back light ON. The default setting is "ON".

1Press the Menu key to display the Setup menu, select "Backlight" using the or key, and then press the OK or Enter key.

2Select "ON" or "OFF" using the or key.

3Press the OK or Enter key.

• Power can be saved when the back light is turned off.

• The back light is turned off automatically if there is no operation for more than 10 seconds. It can be turned back on by pressing any key. The back light turns off when printing.

Setting Language and Unit

Language

1Press the Menu key to display the Setup menu, select "Language" using the or key, and then press the OK or Enter key.

2Select a language for menu commands and messages shown on the LCD display by using the or key.

The language can be selected from "Čeština", "Dansk", "Deutsch", "English", "Español", "Français", "Hrvatski", "Italiano", "Magyar", "Nederlands", "Norsk", "Polski", "Português", "Português(Brasil)", "Română", "Slovenski", "Slovenský", "Suomi", "Svenska" or "Türkçe".

3Press the OK or Enter key.

Press the Escape key to return to the previous step.

Unit

1Press the Menu key to display the Setup menu, select "Unit" using the or key, and then press the OK or Enter key.

2Select a unit for dimensions shown on the LCD display by using the or key. Either "inch" or "mm" can be selected.

3Press the OK or Enter key.

The default setting is "inch".

Press the Escape key to return to the previous step.

 

Setting Language and Unit

24