GETTING STARTED

Power Supply

Battery

1After making sure that the power is off, remove the

rear cover on the back of the machine. If the batteries are already in the machine, remove them.

Make sure that the power is turned off when replacing batteries.

2Insert six new AA-size alkaline batteries (LR06), or

fully charged Ni-MH rechargeable batteries (HR06), making sure that the positive (+) and negative (-) ends of the batteries match the positive (+) and negative (-) marks inside the battery compartment.

Users of alkaline batteries

Always replace all six batteries at the same time using brand new ones.

Users of Ni-MH rechargeable batteries

Always replace all six batteries at the same with fully charged ones.

Visit us at http://solutions.brother.com/ for the latest information about the recommended batteries.

3Attach the rear cover by inserting the three hooks at

the bottom into the slots on the machine, then pushing down firmly until it snaps into place.

Remove the batteries if you do not intend to use the P-touch labeler for an extended period of time.

 

Power Supply

18