Connect the P-touch labeler and computer with a USB cable.

Printing from iOS Devices

Connecting the P-touch labeler to Your iOS Device

a

b If the Wi-Fi lamp is not lit, press and hold the Wireless Mode button for one second to turn on the wireless

LAN function.

 

After the Wi-Fi lamp is lit, release the button. The Wi-Fi lamp flashes.

3

c For Windows®

 

Start the Printer Setting Tool on your computer, and click the [Communication settings] button. Confirm that the [Enable Wireless Direct when Wireless LAN is turned on] checkbox is selected in the [General] tab of the Communication settings.

(This is selected as the factory default.)

See Using the Communication Settings on page 19 for details on the Communication settings.

For Macintosh

Start the P-touch Utility with your computer, and confirm that [Wireless Direct] is set to [ON] in the [Wireless Direct] tab.

See Brother P-touch Utility (for Macintosh) on page 35 for details on the P-touch Utility.

d In the Wi-Fi settings screen of your iOS device, select the SSID of the P-touch labeler and enter the password.

Note

•The factory default SSID and password are as follows:

SSID: “DIRECT-brPT-P750W****” where “****” is the last four digits of the product serial number. (You can find the serial number label by opening the cassette cover.)

Password (Network key): 00000000

•If you want to print the SSID and password, press the Wireless Mode button twice. (Use 0.94" (24 mm) tape.)

•You can also connect the P-touch labeler to an iOS device in the infrastructure mode via a WLAN access point/router.

Printing from Your iOS Device

a Start one of the Brother applications for mobile devices with your iOS device. (See Available Applications for Use with iOS Devices on page 14.)

b After editing the data you want to print, tap [Print].

15