Printing

 

Button Functions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Power) button functions

Operation

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Turn the printer on

While the printer is turned off, press the

 

(Power) button. The

2

 

 

 

 

POWER indicator turns on.

 

 

 

 

 

 

 

 

 

 

Turn the printer off

While the printer is turned on, press and hold the

 

(Power) button

 

 

 

 

 

 

 

until the POWER indicator turns off. (If the [Auto Power Off] function

 

 

 

is specified in [Device settings] of the “Printer Setting Tool”, the

 

 

 

printer will turn off automatically after the specified period of inactivity.)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Feed) button functions

Operation

 

 

 

 

 

 

Feed the paper

When the paper type is set to [Die-cut Label] or [Media With Marks]:

 

 

 

Press the

(Feed) button to automatically feed the paper to the print

 

 

 

position.

 

 

 

 

 

 

 

 

When the paper type is set to [Continuous Length Tape]:

 

 

 

Press the

(Feed) button to feed the paper about 1" (25.4 mm).

 

The default setting is [Continuous Length Tape].

 

Use [Paper Size Setup] of the “Printer Setting Tool” to register the

 

paper size information with the printer. For details, see Registering

 

Paper Size Information With the Printer on page 9.

 

 

Establish a wireless LAN

With the wireless LAN connection enabled, press and hold (5

connection (WPS)

seconds) this button to easily establish a wireless LAN connection and

(TD-2120N/2130N only)

install the printer driver. However, your WLAN access point/router

 

must support Wi-Fi Protected Setup (WPS). For details, see One-Push

 

Configuration Using WPS on page 99.

 

 

Switch the Bluetooth connection

With the wireless LAN connection disabled, press and hold (5

(TD-2120N/2130N only)

seconds) this button to switch between enabling and disabling the

 

Bluetooth connection. For details, see Connecting the Computer and

 

Printer by Bluetooth on page 104.

 

 

 

 

 

 

(Print) button functions

Operation

 

Perform the specified operation

With the printer idle, press this button to perform the operation

 

specified in [Device settings] of the “Printer Setting Tool”. For

 

details, see Print Key Function on page 36.

 

 

Print the printer setup information

Make sure that a roll is installed, and then hold down (at least 1

 

second) the

(Print) button to begin printing the printer setup

 

information. For details, see Printing the Printer Setup Information

 

on page 19.

 

 

 

Execute a file stored in the mass

With the printer in mass storage mode, press this button to execute a

storage area

command file stored in the mass storage area.

 

 

 

Resetting the incrementing field

Hold down the

(Print) button for at least 5 seconds, until the

 

POWER and STATUS indicators blink 3 times in orange.

 

 

 

13