Inserting the RD Roll
Use genuine Brother roll media. Genuine Brother fanfold media is not available at this time.
a Press and hold the 
(Power) button to
turn the printer off.
Press the cover release lever (1) on either side and lift up to open the RD Roll compartment top cover.
1
b Open the media guides by lifting up the media guide adjustment lever (1) and pulling the media guides outwards.
1
NOTE
The media guides are shipped fully open from the factory.
Printing
c Insert an RD Roll into the RD Roll compartment, and then close the RD Roll compartment top cover.
For an RD Roll
1 Insert the RD Roll so that the | 2 |
labels feed with the side to be printed on facing up (1), as shown.
1
Use RD Rolls with an outer roll dimension of 5" (127 mm) or less. Use RD Rolls designed for TD series printers. Regardless of the size, some RD Rolls may not be usable.
Insert the RD Roll facing the correct direction. If the RD Roll is not inserted correctly, the printer will not print on the correct side of the paper or label.
When using media with the labels rolled up on the inside, insert the roll in the opposite direction of that shown in
15 