Chapter 7
Error message | Solution |
No Template | There is no template with the specified number. Specify a correct number. |
Selected! | When printing a template, an error is indicated if the specified template does |
| not exist. |
|
|
Setting Wireless | The access point could not be found. |
LAN Unsuccessful! | An access point for establishing a connection could not be specified. |
Try again |
|
Memory Full! | Tape exceeding 39.37" (1 m) or incompatible files cannot be printed. |
| An error is indicated if data is transferred, causing the capacity of the user |
| storage area to be exceeded. |
|
|
Wrong Password! | Is the administrator password correct? |
| Type in the correct password. |
| If you do not remember the password, use [Device settings] of the “Printer |
| Setting Tool” to reset the password. For details, see Admin Password |
| |
|
|
Incorrect Value! | Has a value outside of the allowable range been entered? |
| Type in a value within the allowable range. |
|
|
Noncompliant USB | Has a device been connected that is not supported by the USB host port? |
device. Remove | An overcurrent was detected by the USB host port, or connection of an |
Device! | unsupported device was detected. Turn off the printer, and then check the |
| connected device. |
|
|
Charging Error! | Has the rechargeable battery failed to recharge? (when using the optional |
Replace Battery | rechargeable |
| If recharging is not completed after a certain length of time, recharging has failed. |
| Use the AC adapter. |
|
|
Mass Storage | Is the printer in mass storage mode? |
Operation error! | An error is indicated if the file system becomes corrupted or a file is copied while |
| a mass storage file is being processed. Turn off the printer. |
|
|
Recharge Battery! | Does the rechargeable battery have a low charge? (when using the optional |
| rechargeable |
| Use the AC adapter. |
|
|
System Error! 01 | If the error message is displayed, contact Brother Customer Service. |
System Error! 02 |
|
64