KNOWING YOUR SEWING MACHINE
Changing the initial needle position
Normally, the straight stitch (left needle position) is automatically selected when the sewing machine is turned on. The machine can be set so that the straight stitch (center needle position) is automatically selected when it is turned on.
aTurn off the sewing machine.
bHold down the “+” side of 
(stitch selection key) on the left and turn on the sewing machine.
After turning on the sewing machine, release the “+” side of 
(stitch selection key).
XThe initial needle position changes to the center needle position.
Memo
●The specified initial needle position is maintained even after the machine is turned off.
●Perform the same operation to change the initial needle position to the left needle position.
Cancelling the operation beep (for models equipped with the operation beep)
When the sewing machine is purchased, it is set to beep each time a key is pressed. This setting can be changed so that the machine does not beep.
aTurn off the sewing machine.
bHold down the 
(stitch width
adjustment key) and turn on the sewing machine.
After turning on the sewing machine, release
the 
(stitch width adjustment key).
XThe machine is now set so that it will not beep.
Memo
●Perform the same operation to change the setting so that machine beeps.
14