Brother Using overcasting foot

UTILITY STITCHES ———————————————————————————————————————————————————————————————————————————————————————————————————

Using overcasting foot

aAttach overcasting foot “G”.

bSelect stitch or .

•For details, refer to “Selecting a stitch” (page 37).

cPosition the fabric with the edge of the fabric against the guide of the presser foot, and then lower the presser foot lever.

aGuide

dSlowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot.

eSew with the edge of the fabric against the presser foot guide.

1

aNeedle drop point

CAUTION

●After adjusting the stitch width, slowly turn the handwheel toward you (counterclockwise) and check that the needle does not touch the presser foot. If the needle hits the presser foot, the needle may bend or break.

aCheck that the needle does not touch the presser foot.

46