TROUBLESHOOTING
If the machine stops operating correctly, check the following possible problems before requesting service. You can solve most problems by yourself. If you need additional help, the Brother Solutions Center offers the latest FAQs and troubleshooting tips. Visit us at “ http://solutions.brother.com ” .
If the problem persists, contact your dealer or the nearest authorized service center.
Frequent troubleshooting topics
Detailed causes and remedies for common troubleshooting topics are described below. Be sure to refer to this before contacting us.
| ■ Upper thread tightened up |
|
| page 83 |
|
|
|
|
|
|
|
|
|
| ■ Tangled thread on wrong side of fabric |
|
| page 84 |
|
|
|
|
|
|
|
| |
| ■ Incorrect thread tension (Upper/lower side of fabric) |
| page 87 |
|
| |
|
|
|
|
|
| |
| ■ Fabric is caught in the machine and cannot be removed |
| page 88 |
| 4 | |
|
|
|
|
| ||
| Upper thread tightened up | ■ Remedy/check details | ||||
| Correctly install the lower thread. |
| ||||
■ Symptom | aTurn off the sewing machine. |
| ||||
| • The upper thread appears as a single |
| ||||
| continuous line. | bRemove the bobbin from the bobbin case. |
| |||
| • The lower thread is visible from the upper |
| ||||
| side of the fabric. (Refer to the illustration |
| Place the bobbin in the bobbin case so that |
| ||
| below.) | cthe thread unwinds in the correct direction. |
| |||
| • The upper thread has tightened up, and |
| • Hold the bobbin with your right hand with |
| ||
| comes out when pulled. |
|
| |||
|
| the thread unwinding to the left, and hold |
| |||
| • The upper thread has tightened up, and |
|
| |||
|
| the end of the thread with your left hand. |
| |||
| wrinkles appear in the fabric. |
|
| |||
|
| Then, with your right hand, place the bobbin |
| |||
| • The upper thread tension is tight, and the |
|
| |||
|
| in the bobbin case. |
| |||
| results do not change even after the thread |
|
| |||
|
|
|
|
|
| |
| tension is adjusted. |
|
|
|
|
|
a Lower side of fabric | If the bobbin is inserted with the thread | |
unwinding in the wrong direction, sewing will be | ||
b Lower thread visible from upper side of fabric | ||
c Upper thread | done with an incorrect thread tension. |
dUpper side of fabric
eLower thread
■Cause
Incorrect lower threading
If the lower thread is incorrectly threaded, instead of the appropriate tension being applied to the lower thread, it is pulled through the fabric when the upper thread is pulled up. For this reason, the thread is visible from the upper side of the fabric.
83