Compound Bow
USER’S GUIDE
7
STRING RECOIL SUPPRESSOR (SRS) SYSTEM
Rotate the rubber stop approximately 60 degrees every 500 shots
Replace rubber stops when the string and cables are replaced
Do NOTadjust the SRS bracket. It is factory set in the correct
position.
See your Browning Archery Dealer for replacements and
installation
CAM ADJUSTMENTS

Cam Adjustments:

All Browning Archery cams use the patented Inner
Cam System. This system allows draw length adjustments over a
prescribed range without putting the bow in a bowpress. In all cases, the
"A" setting is the longest draw length for that bow and draw lengths get
shorter as you progress up the alphabet (A to B, B to C, etc.). When
adjusting the inner cam on a two-cam bow or hybrid cam bow, both cams
must be set in the same letter position.

WARNING:

Tighten all cam screws before shooting your bow!

BROWNING ARCHERY DISCOVERYCAMS
The Discoverycam
design ramps up to
the bow’s peak draw
weight and then
holds a constant
draw weight up to
30 inches.
Inner
Cam
Screw
Lock
Screw
SRSSystem Patent Pending

60º