|
| 1002rp server 31 |
|
|
|
Beep | Message | Description |
count |
|
|
|
|
|
7 | Processor Exception | The CPU on the processor board generated an exception |
| Interrupt Error | interrupt. |
8 | Display Memory | The system video adapter is missing, or its memory is |
| Read/Write Error | faulty. |
|
| Note: This error is not fatal. |
9 | ROM Checksum Error | The ROM checksum value does not match the value |
|
| encoded in the BIOS. |
|
|
|
System troubleshooting
Trouble symptom | Action | ||
The system appears dead. | • | Check if the power cord is properly plugged in the power outlet. | |
|
| If the system is a direct current (dc) version, the power cables | |
|
| can be reversed; ensure that the polarity of the cables is correct. | |
• The server does not | • | Ensure that the breaker corresponding to the cable is in the ON | |
boot. | |||
| position. | ||
|
| ||
• The server emits no | • | Ensure that the correct type of cable is used, depending on the | |
beeps. | |||
| type of power supply (ac or dc). | ||
|
| ||
• The fans do not turn.
• Check if other equipment plugged in the same power outlet works.
Note: If the fans are turning, but the system emits no beeps, check if the monitor is turned on.
Check if the two LEDs on the power supplies (at the back of the server) are on or red.
•If the LEDs are not on, check the power supply fuse.
•If the LEDs are on and red, one or both power supplies is not plugged in or plugged in incorrectly, or the connection pins on the power supplies are bent or missing.
Nortel CallPilot
Troubleshooting Reference Guide
5.026 June 2007
