06Using the tuner
1Tune to a station you want to memorize. See Listening to the radio on page 41 for more on this.
2Press TUNER EDIT.
The display shows PRESET, then a blinking MEM and station preset.
3Press PRESET / to select the station preset you want.
You can also use the number buttons.
4Press ENTER.
After pressing ENTER, the preset number stop blinking and the receiver stores the station.
Listening to station presets
You will need to have some presets stored to do this. See Saving station presets on page 41 if you haven’t done this already.
•Press PRESET / to select the station preset you want.
•You can also use the number buttons on the remote control to recall the station preset.
Naming preset stations
For easier identification, you can name all of your preset stations.
1Choose the station preset you want to name.
See Listening to station presets above for how to do this.
2Press TUNER EDIT twice.
The cursor at the first character position is blinking on the display.
3 Input the name you want.
Choose a name up to eight characters long.
•Use the PRESET / buttons to select character position.
•Use the TUNE / buttons to select characters.
•The name is stored when ENTER is pressed.
42
Tip
•To erase a station name, follow steps 1 and 2, and press ENTER while the display is blank. Press TUNER EDIT while the display is blank, to keep the previous name.
•Once you have named a station preset, Press DISP to show the name. When you want to return to the frequency display, press DISP several times to show the frequency.
En
