Pioneer VSX-520 manual The System Setup menu Chapter, Using the System Setup menu, English

The System Setup menu

Chapter 5:

The System Setup menu

05

English

Using the System Setup menu

The following section shows you how to make detailed settings to specify how you’re using the receiver. It also explains how to fine-tune individual speaker system settings.

				AUDIO		TUNER EDIT	MASTER
				PARAMETER		TOOLS	VOLUME
				TOP	TUNE	MENU
			TV
RECEIVER	SLEEP	SOURCE		MENU
			CONTROL
				T		P
				E		R
RECEIVER	INPUT SELECT		DTV/TV	S	ENTER	E
				E		S
				P		E
			INPUT	R		T
BD	DVD	TV		HOME
				MENU	TUNE
						BAND
				SETUP		RETURN

1Press RECEIVER on the remote control, then press the SETUP button.

2Use / to select the setting you want to adjust then press ENTER.

•SP SETUP – Specify the size, number, distance and overall balance of the speakers you’ve connected (see Manual speaker setup below).

•IN ASSIG – Specify what you’ve connected to the component video inputs (see The Input Assign menu on page 40).

•PRE OUT – Specify how to use the PRE OUT outputs (see The Pre Out Setting on page 40).

Manual speaker setup

These setting optimize surround sound performance. You only need to make these settings once (unless you change the placement of your current speaker system or add new speakers).

Important

•Depending on the PRE OUT setting, there will be differences in the speaker items that can be adjusted.

1Select ‘SP SETUP’ from the System Setup menu.

2Use / to select the setting you want to adjust then press ENTER.

•SP SET – Specify size / number of speakers connected (see Speaker setting below).

•X.OVER – Specify which frequencies will be sent to the subwoofer (see Crossover network on page 39).

•CH LEVEL – Adjust overall balance of your speaker system (see Channel level on page 39).

•SP DISTN – Specify the distance of your speakers from the listening position (see Speaker distance on page 39).

3Press RETURN after making the adjustments necessary for each setting.

Français Español

37

En