Connecting your equipment | 03 |
Digital audio cables
Commercially available coaxial digital audio cables or optical cables should be used to connect digital components to this receiver.1
Coaxial digital audio cable | Optical cable |
Video cables
Standard RCA video cables
These cables are the most common type of video connection and are used to connect to the composite video terminals. The yellow plugs distinguish them from cables for audio.
About video outputs connection
This receiver is not loaded with a video converter. When you use component video cables or HDMI cables for connecting to the input device, the same cables should be used for connecting to the TV.
The signals input from the analog (composite and component) video inputs of this unit will not be output from the HDMI OUT.
Playback 
component
Terminal for connection with source device
English Deutsch Français
Standard RCA video cable
Component video cables
Use component video cables to get the best possible color reproduction of your video
| PR | PB | Y |
HDMI IN |
| COMPONENT VIDEO IN | |
| PR | PB | Y |
HDMI OUT | COMPONENT VIDEO OUT | ||
VIDEO IN
MONITOR OUT
Italiano Nederlands
source. The color signal of the TV is divided into the luminance (Y) signal and the color (PB and PR) signals and then output. In this way, interference between the signals is avoided.
Component video cables
Green (Y) 
Blue (PB)
Red (PR)
Terminal for connection with TV monitor
TV
Video signals can be output.
Español
Note
1• When connecting optical cables, be careful when inserting the plug not to damage the shutter protecting the optical socket.
•When storing optical cable, coil loosely. The cable may be damaged if bent around sharp corners.
•You can also use a standard RCA video cable for coaxial digital connections.
21
En
