03Connecting your equipment
Connecting the speakers
The receiver will work with just two stereo speakers (the front speakers in the diagram) but using at least three speakers is recommended, and a complete setup is best for surround sound.
Make sure you connect the speaker on the right to the right (R) terminal and the speaker on the left to the left (L) terminal. Also make sure the positive and negative
If you’re not using a subwoofer, change the front speaker setting (see Speaker setting on page 38) to LARGE.
Be sure to complete all connections before connecting this unit to the AC power source.
Bare wire connections
Front speaker terminals:
1Twist exposed wire strands together.
2Loosen terminal and insert exposed wire.
3Tighten terminal.
1 | 2 | 3 |
10 mm (3/8 in.)
Center and surround speaker terminals:
1Twist exposed wire strands together.
2Push open the tabs and insert exposed wire.
3Release the tabs.
1 | 2 |
|
|
| 3 | |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
10 mm (3/8 in.)
E
SUBWOOFER |
|
PRE OUT |
|
| DVR/VCR |
SURR BACK / |
|
FRONT |
|
HEIGHT |
|
L |
|
(Single) | OUT |
R |
|
PRE OUT | |
CD | |
L |
|
IN | IN |
ADAPTER PORT
(OUTPUT 5 V 100 mA MAX)
VIDEO DVR/VCR | TV/SAT | |
OUT | IN | IN |
MONITOR OUT DVD IN | BD IN | |
P | P | Y |
R FRONT L
SPEAKERS A
SURROUND
R L
Class 2 Wiring
CENTER
SW | L | R | C | SL | SR |
Powered subwoofer | Front speakers | Center speaker | Surround speakers | ||
18
En
