Flow of settings on the receiver
The unit is a
The colors of the steps indicate the following:
Required setting item
Setting to be made as necessary
1Before you start
•Checking what’s in the box (page 7)
•Loading the batteries (page 7)
2Connecting the speakers
Where you place the speakers will have a big effect on the sound. Place your speakers as shown below for the best surround sound effect.
•Placing the speakers (page 16)
•Connecting the speakers (page 18)
•Connect the surround back or front height speakers (page 19)
*Front Height
Right (FHR)
*Front Height
Left (FHL) Subwoofer (SW)
Front Listening
Right (R) position
Surround
Front 
Right (SR)
Left (L)
4Power On
Make sure you’ve set the video input on your TV to this receiver. Check the manual that came with the TV if you don’t know how to do this.
5The Pre Out Setting (page 40)
(When connecting the front height speakers.)
The Input Assign menu (page 40)
(When using connections other than the recommended connections.)
6 | Basic playback (page 27) |
| |
|
|
7 | Adjusting the sound as desired |
• | Using the various listening modes |
Center (C)
Surround 
Left (SL) 
*Surround Back Right (SBR)
• Using the Sound Retriever (page 31) |
• Better sound using Phase Control (page 31) |
• Using surround back channel processing |
(page 32) |
*Surround Back
Left (SBL)
You can connect only one of either the surround back speaker or the front height speaker.
3Connecting the components
For surround sound, you’ll want to hook up using a digital connection from the BD/DVD player to the receiver.
•About video outputs connection (page 21)
•Connecting a TV and playback components (page 22)
•Connecting antennas (page 25)
•Plugging in the receiver (page 26)
• Setting the Up Mix function (page 33) |
• Setting the Audio options (page 33) |
• Choosing the input signal (page 36) |
• Manual speaker setup (page 37) |
6
En
