02Controls and displays
PRESET /
Use to select preset radio stations (page 41).
7MASTER VOLUME dial
8PHONES jack
Use to connect headphones. When the headphones are connected, there is no sound output from the speakers (page 36).
9Listening mode buttons
AUTO/DIRECT
Switches between Auto surround mode (Auto playback on page 28) and Stream Direct playback. Stream Direct playback bypasses the tone controls for the most accurate reproduction of a source (page 31).
STEREO/ALC
Switches between stereo playback, Auto level control stereo mode (page 30) and Front Stage Surround Advance modes (page 30).
STANDARD
Press for Standard decoding and to switch between the various 2Pro Logic II, 2Pro Logic IIx, 2 Pro Logic IIz and NEO:6 options (page 28).
ADV SURROUND
Switches between the various surround modes (page 29).
10SOUND RETRIEVER
Press to restore CD quality sound to compressed audio sources (page 31).
11 PORTABLE audio input jack
Connect an auxiliary component using a stereo
Operating range of remote control
The remote control may not work properly if:
•There are obstacles between the remote control and the receiver’s remote sensor.
•Direct sunlight or fluorescent light is shining onto the remote sensor.
•The receiver is located near a device that is emitting infrared rays.
•The receiver is operated simultaneously with another infrared remote control unit.
30° 
30° 
7 m (23 ft.)
10
En
