Pioneer VSX-520 manual Listening to your system, English, Français Español, Setting, What it does

Listening to your system 04

Setting	What it does
A.DLY	This feature automatically corrects the audio-to-video delay
(Auto Delay)	between components connected with an HDMI cable. The
	audio delay time is set depending on the operational status
	of the display connected with an HDMI cable. The video
	delay time is automatically adjusted according to the audio
	delay time.f

Option(s)

OFF

ON

English

C.WIDTHg	Spreads the center channel between the front right and left	0 to 7
(Center Width)	speakers, making it sound wider (higher settings) or	Default: 3
	narrower (lower settings).
(Applicable only when
using a center speaker)
DIMEN.g	Adjusts the surround sound balance from front to back,	–3 to +3
(Dimension)	making the sound more distant (minus settings), or more	Default: 0
	forward (positive settings).
PNRM.g	Extends the front stereo image to include surround	OFF
(Panorama)	speakers for a ‘wraparound’ effect.
		ON
C.IMGh	Adjust the center image to create a wider stereo effect with	0 to 10
(Center image)	vocals. Adjust the effect from 0 (all center channel sent to	Default: 3
(Applicable only when	front right and left speakers) to 10 (center channel sent to	(NEO:6 MUSIC),
using a center speaker)	the center speaker only).	10 (NEO:6 CINEMA)
H.GAIN	Adjusts the output from the front height speaker when	L (Low)
(Height Gain)	listening in DOLBY PLIIz HEIGHT mode. If set to H, the
		M (Mid)
	sound from the top will be more emphasized.
		H (High)

a.You can change the MIDNIGHT/LOUDNESS options at any time by using MIDNIGHT button.

b.You can change the Sound Retriever feature at any time by using S.RETRIEVER button.

c.This setting works only with dual mono encoded Dolby Digital and DTS soundtracks.

d.The initial set AUTO is only available for Dolby TrueHD signals. Select MAX or MID for signals other than Dolby TrueHD.

e.You shouldn’t have any problems using this with most SACD discs, but if the sound distorts, it is best to switch the gain setting back to 0 dB.

f.This feature is only available when the connected display supports the automatic audio/video synchronizing capability (‘lip-sync’) for HDMI. If you find the automatically set delay time unsuitable, set A.DLY to OFF and adjust the delay time manually. For more details about the lip-sync feature of your display, contact the manufacturer directly.

g.Only available with 2-channel sources in DOLBY PLII MUSIC mode.

h.Only when listening to 2-channel sources in NEO:6 CINEMA and NEO:6 MUSIC mode.

Français Español

35

En