Connecting your equipment | 03 |
Connecting antennas
Connect the AM loop antenna and the FM wire antenna as shown below. To improve reception and sound quality, connect external antennas (see Using external antennas below).
Using external antennas |
| |
English | ||
To improve FM reception | ||
| ||
Use an F connector (not supplied) to connect |
| |
an external FM antenna. |
| |
|
|
fig. a | fig. b |
2
4
ANTENNA
ANTENNA |
FM |
UNBAL |
75 Ω |
AM
LOOP
F connector
Deutsch Français
AM | 3 |
LOOP |
|
1 |
1Push open the tabs, then insert one wire fully into each terminal, then release the tabs to secure the AM antenna wires.
2Fix the AM loop antenna to the attached stand.
To fix the stand to the antenna, bend in the direction indicated by the arrow (fig. a) then clip the loop onto the stand (fig. b).
3Place the AM antenna on a flat surface and in a direction giving the best reception.
4Connect the FM wire antenna into the FM antenna socket.
For best results, extend the FM antenna fully and fix to a wall or door frame. Don’t drape loosely or leave coiled up.
To improve AM reception
Connect a 5 m to 6 m (15 ft. to 18 ft.) length of | Italiano | |
| ||
without disconnecting the supplied AM loop |
| |
antenna. |
| |
For the best possible reception, suspend |
| |
| ||
horizontally outdoors. | Nederlands | |
Outdoor |
antenna | ANTENNA | |
FM | ||
| ||
| UNBAL | |
| 75 Ω |
| AM | Español |
| LOOP |
|
Indoor antenna | 5 m to 6 m |
|
(15 ft. to 18 ft.) |
|
25
En
