Accessory Description and Usage (Listed Alphabetically) (Continued)

165A

10. Sound Hood

Wraparound sound reducing cover for the compressor. Reduces the sound level by about 2 dBA.

Usage Guideline:

Suggested when unit is installed closer than 15 ft (4.57 m) to quiet areas, bedrooms, etc.

Suggested when unit is installed between two houses less than 10 ft (3.05 m) apart.

11. Support Feet

Four stick-on plastic feet that raise the unit 4 in. (101.6 mm) above the mounting pad. This allows sand, dirt, and other debris to be flushed from the unit base, minimizing corrosion.

Usage Guideline:

Suggested in the following applications: Coastal installations.

Windy areas or where debris is normally circulating. Rooftop installations.

For improved sound ratings.

12. Thermostatic Expansion Valve (TXV)

Amodulating flow-control valve which meters refrigerant liquid flow rate into the evaporator in response to the superheat of the refrigerant gas leaving the evaporator.

Kit includes valve, adapter tubes, and external equalizer tube. Hard shut off types are available.

NOTE: When using a hard shut off TXV with single phase reciprocating compressors, a Compressor Start Assist Capacitor and Relay is required.

13. Time-Delay Relay

An SPST delay relay which briefly continues operation of indoor blower motor to provide additional cooling after the compressor cycles off.

NOTE: Most indoor unit controls include this feature. For those that do not, use the guideline below.

Usage Guideline:

For improved efficiency ratings for certain combinations of indoor and outdoor units. Refer to ARI Unitary Directory.

14. Winter Start Control

This control is designed to alleviate nuisance opening of the low-pressure switch by bypassing it for the first 3 minutes of operation.

Usage Guideline:

Required to achieve ARI ratings in certain equipment combinations. Refer to combination ratings.

Hard shut off TXV or LLS required in air conditioner long line applications.

Required for use on all zoning systems.

6

Page 5 Page 7
Page 6
Image 6
Bryant 165A manual Sound Hood
Page 5 Page 7

165A specifications

The Bryant 165A is a high-efficiency, multi-positional air conditioning unit designed to deliver optimal indoor comfort regardless of the season. This model is strategically engineered to provide versatility, making it an ideal choice for varied residential applications. One of the standout features of the Bryant 165A is its remarkable Seasonal Energy Efficiency Ratio (SEER) rating, which ensures energy-efficient operation while maintaining reliable cooling performance.

Equipped with a variable-speed inverter compressor, the Bryant 165A operates quietly and adjusts its output according to the temperature demands of your home. This technology allows for smoother transitions between cooling levels, reducing energy consumption and enhancing comfort. Moreover, the compressor's variable-speed nature minimizes operating noise, contributing to a more peaceful indoor environment.

The Bryant 165A is also complemented by advanced humidity control features. By maintaining optimal humidity levels, the unit not only enhances comfort but also helps mitigate mold growth and indoor allergens. This feature makes the unit especially beneficial in humid climates.

Durability is another hallmark of the Bryant 165A. Its robust housing is designed to withstand various weather conditions, and the unit incorporates elements engineered to enhance long-term performance. The unit includes a stainless steel drain pan that further extends its lifespan by reducing the potential for corrosion.

In terms of installation flexibility, the Bryant 165A offers a multi-positional design that allows it to be installed in various orientations. This adaptability makes it suitable for a wide range of spaces, ensuring that homeowners can achieve the most efficient setup for their specific requirements.

The Bryant 165A also includes smart technology integration, allowing homeowners to control their systems remotely through compatible smart thermostats. This feature not only promotes convenience but also allows for precise temperature management, leading to increased energy savings.

In summary, the Bryant 165A is a highly efficient, versatile, and reliable air conditioning solution. With its energy-efficient operation, enhanced humidity control, durable construction, installation flexibility, and smart technology integration, it stands out as an excellent choice for homeowners seeking comfort in their living spaces. Whether during hot summers or mild winters, the Bryant 165A ensures that indoor environments remain comfortable and welcoming all year round.
Top Page Image Contents