Bryant 359AAV instruction manual Exhaust, Inlet, Downflow Left Side Vent and Trap

Plastic Cap

Yellow or black

Coupling & Clamps (Optional)

Vent Drain

& Clamps Either: The PVC

Drain Tee or a field

supplied 2″ (51 mm)

PVC Tee

Single Pressure Switch Detail

AIR FLOW

EXHAUST

2″ (51 mm) PVC Coupling

Dual Pressure Switch

AIR FLOW

SIDE VIEW

Rotate downward 5° to 10°

NOTE: Built--in channel will be angled 5° to 10° also.

Relief Tube
Black Rubber 3/ ″ (5 mm) ID
16
On Some Models
ONLY	359AAV
INLET

Tee Trap White PVC	Drain Tube
	Black Rubber
(loose parts bag)	1/ ″ ID (13 mm) & Clamps
	2

Elbow Tube Black Rubber 1/2″ ID (13 mm) & Clamps (Loose Parts Bag)

WARNING Move Caps to top of trap

Drain Tube Black, 5/8″ (16 mm) ID Corrugated

Cut at straight section

OFF

ON

Flexible Tubing Connector,

3/ ″ (5 mm) OD (loose parts bag)

16

Relief Tube,

Extension Black Rubber,

3/ ″ (5 mm) ID Cut to fit

16

(loose parts bag)

Trap Connection “Clamp ears”

Pointed OUT

	Barbed Coupling	1/ ″ (13 mm) OD
	(loose parts bag)	2
Leave room for clamp	Cut Here

Fig. 9 - Downflow Left Side Vent and Trap

9

Preassemble & insert into furnace

25--24--69

A07767