—10—
REQUIRED CLEARANCE FOR OPERATION AND SERVICING
in. [mm]
EVAP. COIL ACCESS SIDE..............................................................36.00 [914.0]
POWER ENTRY SIDE......................................................................36.00 [914.0]
(EXCEPT FOR NEC REQUIREMENTS)
UNIT TOP.........................................................................................36.00 [914.0]
SIDE OPPOSITE DUCTS................................................................36.00 [914.0]
DUCT PANEL...................................................................................12.00 [304.8] *
*MINIMUM DISTANCES: IF UNIT IS PLACED LESS THAN 12.00 [304.8] FROM
WALL SYSTEM, THEN SYSTEM PERFORMANCE MAYBE COMPROMISE.
REQUIRED CLEARANCE TO COMBUSTIBLE MATL.
in. [mm]
TOP OF UNIT...................................................................................14.00 [355.6]
DUCT SIDE OF UNIT.........................................................................2.00 [50.8]
SIDE OPPOSITE DUCTS................................................................14.00 [355.6]
BOTTOM OF UNIT.............................................................................0.50 [12.7]
FLUE PANEL....................................................................................36.00 [914.4]
NEC. REQUIRED CLEARANCES.
MILLIMETERS [IN.]
BETWEEN UNITS, POWER ENTRY SIDE....................................42.00 [1066.8]
UNIT AND UNGROUNDED SURFACES, POWER ENTRY SIDE...36.00 [914.0]
UNIT AND BLOCK OR CONCRETE WALLS AND OTHER
GROUNDED SURFACES, POWER ENTRY SIDE.........................42.00 [1066.8]
FLUE
UNIT ELECTRICAL
CHARACTERISTICS
UNIT WEIGHT UNIT HEIGHT
IN. [MM]
“A”
CENTER OF GRAVITY
IN. [MM]
lb. kg. X Y Z
574B042060/090 208/230-1-60
208/230-3-60
574B048090/115/130 208/230-1-60
208/230-3-60 463 210 44.98 [1142.4] 19.5 [495.3] 17.6 [447.6] 18.0 [457.2]
574B060090/115/130 208/230-1-60,
208/230-3-60, 499 226 46.98 [1193.3] 21 [533.4] 20 [508] 17.6 [447.0]
BASE UNIT DIMENSIONS – 574B042-060
C99074