Quick Start Set the Clock and Go
Press the Mode button.
MODE While holding the Mode, press the Fan button for 2 seconds to enter Setup
FAN
screens.
I2:00 | I |
During Setup & Programming: Pressing the Mode button selects different flashing items. (Represented in dark black)
Pressing the Up and Down buttons will modify the flashing selection.
To adjust the
Press clock or Day use
Su | 2 | MODE |
|
|
buttons.
Press both Mode and | MODE |
Fan buttons as |
|
above to return to normal operation.
FAN
The thermostat is preprogrammed from the
factory to operate 1 or 2 Stage equipment* without the need for further programming. To optimize the installation of this thermostat follow the instructions in the Advanced Setup section.
*The thermostat is not preprogrammed from the factory to operate electric heat or heat pump systems.
To control these systems, follow the steps in the Advanced Setup section, pages 12 - 15.
Page 5
