Bryant R-410A warranty Tested combination

*Tested combination.

†In most cases, only 1 method should be used to achieve TDR function. Using more than 1 method in a system may cause degradation in performance. Use either the accessory Time-Delay Relay KAATD0101TDR or a furnace equipped with TDR. Most Bryant furnaces are equipped with TDR.

‡Based on computer simulation. TXV must be Puron® compatible and hard shutoff type. ** Ratings shown are with R-22 TXV replaced with Puron® TXV.

EER — Energy Efficiency Ratio

SEER — Seasonal Energy Efficiency Ratio TDR — Time-Delay Relay

TXV — Puron® Thermostatic Expansion Valve

NOTES: 1. Ratings are net values reflecting the effects of circulating fan motor heat. Supplemental electric heat is not included.

2.Tested outdoor/indoor combinations have been tested in accordance with DOE test procedures for electric air conditioners. Ratings for other com- binations are determined under DOE computer simulation procedures.

3.Determine actual CFM values obtainable for your system by referring to fan performance data in fan coil or furnace coil literature.

4.Do not apply with capillary tube coils as performance and reliability are significantly affected.

— 14—