14B SST Series Amplifier

5. Output binding posts.

The RED binding post is the in-phase amplifier output. Connect to this post the (+) terminal on the loudspeaker.

The BLUE binding post is the inverted-phase amplifier output. Connect to this post the (-) terminal on the loudspeaker. Note: At no time should either output be connected to a ground, or chassis. Failure of the amplifier may result. Never connect either output in parallel with another amplifier.

The minimum recommended loudspeaker load is 4 ohms.

The Output binding posts provide three different interconnect options. Combinations may be used when bi-wiring. See fig- ure 2 below. Cables should be kept as short as practical and should never be terminated with connectors that may become confused for AC power connectors. Cables should be dressed away from input and power cables.

1. Banana plugs offer a quick disconnect option. Before inserting a banana plug into the binding post be sure to tighten the post nut to avoid rattling and to provide full insertion of the banana plug. Gold plated locking banana plugs are available from Bryston.

2. Spade lugs provide high contact area and secure fastening. Lugs should be gold plated. See diagram for details. Post diameter is 5/16’ ( 8mm ), lug width 5/8” (16 mm). Gold plated spade lugs are available from Bryston.

3. Stripped bare wire up to 3 gage can be inserted through the hole in the binding post and held in place by tightening the post knob. Additional tightening pressure can be achieved using a coin in the slots of the knob. Do not over tighten or the binding post may become damaged. Note that copper wire is malleable and may require further tightening after the initial installation.

Spade lug dimensions

5/16”

5/8”

Fig 2

2

3

1

Coin

3

Page 4 Page 6
Page 5
Image 5
Bryston 14B SST owner manual Coin, Output binding posts
Page 4 Page 6

14B SST specifications

The Bryston 14B SST is a high-performance power amplifier that has garnered acclaim for its engineering excellence and robust sound reproduction. Designed to meet the demands of audiophiles and professional audio applications, the 14B SST stands out with its impressive combination of power, precision, and reliability.

One of the main features of the Bryston 14B SST is its power output. With a staggering 600 watts per channel into 8 ohms and 1000 watts into 4 ohms, the amplifier delivers the muscle required to drive even the most demanding loudspeakers with ease. This level of power not only provides immense dynamic range but also ensures that systems maintain clarity and control at high volumes.

The 14B SST incorporates advanced technologies that elevate its performance. It utilizes a fully complimentary and symmetrical circuit design, which contributes to low distortion and high linearity. This architecture is crucial in achieving a clean and transparent sound, allowing listeners to experience music as it was intended to be heard. The amplifier also features a sophisticated power supply with large toroidal transformers that minimize noise and maximize energy delivery.

Another key characteristic of the Bryston 14B SST is its build quality. Encased in a sturdy chassis with premium components, this amplifier is designed for durability and longevity. The extensive use of heat sinks allows for efficient heat dissipation, ensuring reliable operation even during extended use. The attention to detail in construction not only enhances performance but also gives the amplifier a timeless aesthetic that fits seamlessly into any audio setup.

Bryston's commitment to quality is reflected in the 14B SST's high-quality output transistors, which have been carefully selected for their performance characteristics. The amplifier’s circuitry is optimized for minimal interference and noise, resulting in an engaging listening experience. The 14B SST also features Bryston’s innovative SST technology, which stands for "Squared, Symmetrical, and Time-aligned" - a design philosophy that helps to ensure accurate waveform reproduction.

In addition to its impressive technical specifications, the Bryston 14B SST comes with an extensive warranty, which is a testament to its reliability and Bryston’s confidence in their product. With all these features combined, the Bryston 14B SST presents itself as an ideal choice for audiophiles seeking uncompromised sound quality, power, and durability, making it a standout amplifier in the competitive high-end audio market.
Top Page Image Contents